20-120-NF-THIN
Industrial
20" Dia, Carbide Tipped, Non Ferrous Saw Blade, .142" (3.6mm) Kerf, 120 Teeth, TCG
MSRP: CA$ 521.16
In stock
SKU
20-120-NF-THIN
CA$ 521.16
Technical Specifications
| Tool ID | 20-120-NF-THIN |
|---|---|
| Brand | Dimar |
| Trade | Industrial |
| Diameter | 20" |
| Teeth | 120 |
| Kerf (B) | .142” (3.6mm) |
| Bore | 1" |
| Grind | TCG-N/F- Triple Chip Grind- Non Ferrous Metal |
| Hook Angle | - 6° |
| Technology | Carbide Tipped |
| Material | Non-Ferrous Material |
| Machine | Miter Saw, Sliding Mitre Saw , Radial Arm Saw, Stationary Table Saw, Vertical Panel Saw |
Description
For cutting aluminum sheets, tubing extrusions, and other non-ferrous metals such as copper, brass, lead, and magnesium. For smooth cutting, use lots of lubricants and a clamping device.
Note: The material must be clamped firmly to the table on both sides during the cutting operation. The use of coolant is very important.
-
Carbide tipped for maximum performance
-
This blade is furnished with a NEG 6° hook angle for a reasonable finish
-
High-quality copper plugs ensure reduction in turbulent noise by 30%
Write Your Own Review