1614.255
Industrial
73.03mm Dia, Bormax Prima, Special Counterbore, 13mm Shank, 155mm Length
MSRP: CA$ 276.12
In stock
SKU
1614.255
CA$ 276.12
Technical Specifications
| Tool ID | 1614.255 |
|---|---|
| Number of Cutters | 2 |
| Brand | Dimar |
| Trade | Industrial |
| Diameter (D) | 2 7/8" (73.03mm) |
| Shank (d) | 13mm |
| Overall Length (L) | 155mm |
| Material | Soft Wood, Hard Wood, MDF, Chipboards |
| Machine | Drill Press |
Description
Bormax® prima with exchangeable pre-drill bit, centre drill bit or guiding pin. Due to the two main cutting edges, which are grooved shifted, as well as the toothed linear grooved pre-cutters, much less feed force is needed. Consequently there is minimized friction and therefore less heat generation.
A matching centre drill bit and an allen wrench are included in the delivery.
Hexagonal shank for a better power transfer. In combination with the pre-drill bit or the guiding pin 1619 ideally suited for inclined bores.
Clean drilling in soft wood, European hard wood, chipboard and MDF.
We recommend our Bormax® WS prima (pilot guided) with matching extension for smaller diameters (1624 & 1639). For smaller diameters we recommend our Bormax® WS prima with corresponding extension of our series 1624 & 1639.
Write Your Own Review